When the power goes out, your well pump stops, and so does your water: no faucets, no flushing, no showers. A generator that can handle your well pump’s startup surge, connected through a proper transfer switch, keeps water flowing until power returns.
Why Well Pumps Are Hard on Generators
A well pump motor draws far more power for a moment when it starts than it does while running. That startup surge is what trips undersized generators or keeps the pump from starting at all. Deep well submersible pumps, common across the Hudson Valley, can have large starting loads.
To size a generator for your well:
- Find the pump’s horsepower and voltage. It’s on the pump control box, pressure switch paperwork, or installation records.
- Look up the pump’s starting and running requirements.
- Add the other items you want to run, such as the furnace or boiler, refrigerator, sump pump, and lights.
- Make sure the generator can handle the pump starting while other loads are already running.
Our post on sizing a standby generator walks through the full process.
Portable vs. Standby
- Portable generators can run a well pump if they’re large enough and connected through a transfer switch or interlock. Someone has to set them up and refuel them.
- Standby generators start on their own within seconds of an outage. They’re the better choice if you’re away from home often, have a family member who relies on running water, or lose power often.
Connect It Safely
Most well pumps are hardwired at 240 volts, so you can’t plug them into a generator with an extension cord. The right way to connect is through:
- A transfer switch that moves selected circuits to generator power, or
- A panel interlock that prevents the main breaker and generator breaker from being on at the same time.
Never backfeed a panel through a dryer outlet. It can electrocute utility workers and damage your equipment. Never run a portable generator in a garage or near windows. Keep it well away from the house.
Don’t Forget the Rest of the System
- Pressure tank: Holds some water, so faucets work briefly after the power goes out. A waterlogged tank makes the pump cycle more, which is harder on a generator.
- Water treatment: Softeners and UV systems need power too.
- Heat: If your boiler or furnace is on the generator, your pipes are protected from freezing as well.
Get Your Well and Generator Matched
JSP Home Services has served Kingston and the Hudson Valley since 2006. We work on both well pumps and generators, so we can size the generator to your pump and install the transfer switch, with upfront pricing.